Blackhawk Wideband LPDA Antenna
Wideband 700-2700 MHz, 11 - 12 dBi
Part Number: BH-YG-LOG-LPDA-10
I've tested it on 3 sites using Telstra, Vodafone and Optus and as an all round directional it's fantastic.
Now 5G ready!
Operating on all 3G, 4G and 5G frequencies in Australia, this high-grade antenna can be used in a range of residential, commercial, and industrial mobile broadband applications on any mobile network. This is the ideal external antenna for Cel-Fi repeater systems.
The Blackhawk LPDA Antenna provides an ideal solution for 3G/ 4G voice and data applications. With the rollout of new 3G, 4G and even 5G frequencies, traditional Yagi antennas just haven’t been able to keep up. LPDA antennas allow a single antenna to cover all frequencies with the high gain of a Yagi antenna that rural and remote areas demand. This one antenna can be used on any mobile phone network in Australia, in any area without worrying about compatibility.
Mounting is made simple with a mast down-tilt bracket and U-Bolts. This enables you to mount the antenna on a flat surface or a pole making it suitable for a wide variety of applications.
A Log Periodic Dipole Antenna, or LPDA for short, is a clever antenna design that provides exceptional wide-band performance by phasing a series of elements together, much like an ordinary Yagi but with each successive element of a smaller (or larger) length. The result of this clever engineering is an antenna that holds high gain, with good tuning, across the entire cellular frequency range.
- 12 dBi gain across lower bands 698-960 MHz
- 14 dBi gain across bands 1710-2700 MHz
- 12 dBi gain across upper bands 3300-4000 MHz
- Ruggedised construction for Australian conditions
- Fully welded, powder coat aluminium design
- Stainless steel mounting clamp included
- 30 cm tail with pre-terminated N Female connector
- Ideal for high-speed 3G and 4G LTE applications.
- Ideal for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G & 5G
|Frequency Range||698-960 / 1710-2700/ 3300-4000|
|Input Impedance||50 Ω|
|Peak Gain||11 / 14 dBi|
|VSWR||≤2.5:1 / ≤1.8:1|
|Horizontal Beamwidth||55 / 42°|
|Vertical Beamwidth||46 / 34°|
|Maximum Input Power||50 W|
|Input Connector||N Female|
|Cable||30 cm cable tail|
|Lightning Protection||DC Ground|
|Radiator Material||Fully welded aluminium, black powder coat|
|Mounting||Stainless Steel, pole mount Ø30-50 mm|
|Dimensions||1240 x 200 x 60 mm|
|Packing Dimensions||1290 x 210 x 90 mm|
|Rated Wind Velocity||192 km/h|
|Operating Temperature||-40 to +65°C|