MIMO XPOL High Gain Panel

Blackhawk XPOL MIMO High Gain Antenna

Low Band 700-900 MHz, 14 dBi

Part Number: BH-MIMO-700

high gain panel antenna for Telstra 4GX MIMO

Ideal for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G.

This antenna has been designed for absolute maximum speed on low frequency 4G networks, such as Telstra 4GX, and Optus/Vodafone 4G+. With a massive 14 dBi gain this antenna can be used to achieve high speed 4G +60-70 km from a cell tower. Supporting both 850 and 900 MHz, if there's no 4G in range the antenna will provide an incredible boost to your 3G connection.

The Blackhawk MIMO High Gain Panel Antenna provides an ideal solution for 4G data applications where a high speed MIMO data connection is required. This antenna is typically used to provide a high speed 4G connection in very remote areas with only extremely weak 4G signal, or quite often where no 4G signal is present at all.

Panel antennas are the most popular choice for mobile broadband as their 60° receiving angle means the antenna need only be rotated in the 'rough' direction of the cell tower to provide maximum gain. Their construction is in true ±45° 'XPOL' polarisation providing total separation of the two data streams transmitted by the cell tower allowing a near 100% increase in speed over a single polarised antenna. This antenna is extremely well designed, with fully engineered microwave grade internal componentry.

While 1.2 m in height, the antenna remains slim with a 280 mm width ensuring least visual impact possible. The antenna is of course quite large, a consequence of being finely tuned for the lower 700 to 900 MHz frequencies which have a large wavelength.

The robust construction is perfectly suited to the extreme climate that applications will regularly experience across both Australia and New Zealand.


  • 14 dBi gain across lower bands 698-960 MHz
  • Ruggedised construction for extreme conditions
  • UV-stable PVC construction
  • Stainless steel mounting clamp included
  • Two integrated N Female connectors
  • Ideal for high speed 3G and 4G LTE applications.

Network Compatibility

Network Bandwidth Coverage Gain
Telstra 4GX 700 MHz Yes 14 dBi
Telstra Next-G 850 MHz Yes 14 dBi
Optus 4G+ 700 MHz Yes 14 dBi
Optus 3G 900 MHz Yes 14 dBi
Vodafone 4G+ 850 MHz Yes 14 dBi
Vodafone 3G 900 MHz Yes 14 dBi

Electrical Specifications

Frequency Range 698-960 MHz
Input Impedance 50 Ω
Peak Gain 14 dBi
VSWR ≤2.0:1
Polarisation Dual ±45° linear
Horizontal Beamwidth 65°
Vertical Beamwidth 18°
Front-to-Back Ratio >25 dB
Inter-port Isolation >15 dB
Maximum Input Power 100 W

Mechanical Specifications

Input Connector 2x N Female
Cable None supplied
Lightning Protection DC Ground
Radiator Material Passivated aluminium
Radome Material UV stable PVC
Mounting Stainless Steel, pole mount Ø38-70 mm
Dimensions 1280 x 280 x 130 mm
Weight 6.0 kg
Rated Wind Velocity 210 km/h
Operating Temperature -40 to +65°C

Download Specification Sheet

Blackhawk XPOL MIMO High Gain Antenna Specifications

No Comments Yet.

Leave a comment