Blackhawk Yagi Antenna

Telstra Next-G + 4GX, 698 to 890 MHz, 14 dBi

Part Number: BH-YAG-100-10

Blackhawk 14dBi yagi for Telstra Next-G and 4GX

Operating on both Telstra Next-G (850 MHz) and 700 MHz 4GX frequencies, this uniquely designed yagi antenna is the ideal companion to Cel-Fi repeater systems in rural and remote areas.

14 dBi yagi antennas are the most tried and tested antenna design for achieving mobile phone signal in remote areas, often even where no service exists at all. For the past 10 years the 14 dBi yagi has been the backbone of 3G in regional Australia, however with the introduction of the Telstra 4GX network we've gone back to the drawing board to find a design that can provide exceptional Telstra Next-G performance for voice calling, and great 4GX performance for high speed internet. The result has been the Blackhawk 14 dBi Yagi which is the ideal external antenna for Cel-Fi repeater systems in remote and regional areas, allowing full 3G and 4GX to be broadcast inside your house.

The Blackhawk 14 dBi Yagi Antenna has been cleverly detuned to expand operating frequency range to cover both Telstra Next-G and 4GX, allowing one antenna to provide both 3G and 4GX connectivity. While VSWR is higher than an ordinary yagi, the detuning is compensated by high gain and stable transmission across both bands, allowing the repeater or modem to take advantage of the substantially improved receive sensitivity provided by LTE.


  • 14 dBi gain across 698-890 MHz
  • Ruggedised construction for Australian conditions
  • Fully welded black powdercoat design
  • Galvanised universal mounting clamp included
  • Short 30 cm cable tail with pre-fitted N Female connector
  • Ideal for Telstra Next-G and 4GX networks.

Network Compatibility

Network Bandwidth Coverage Gain
Telstra 4GX 700 MHz Yes 14 dBi
Telstra Next-G 850 MHz Yes 14 dBi
Optus 4G+ 700 MHz Yes 14 dBi
Vodafone 4G+ 850 MHz Yes 14 dBi

Electrical Specifications

Frequency Range 690-890 MHz
Input Impedance 50 Ω
Peak Gain 14 dBi
VSWR ≤2.0:1
Polarisation Vertical, linear
Horizontal Beamwidth 27°
Vertical Beamwidth 26°
Front-to-Back Ratio >25 dB
Maximum Input Power 100 W

Mechanical Specifications

Input Connector N Female
Cable Short 30 cm tail
Lightning Protection DC Ground
Radiator Material Fully welded aluminium, black powder coat
Mounting Galvanised, pole mount Ø30-50 mm
Dimensions 1290 x 210 x 70 mm
Packing Dimensions 1330 x 220 x 75 mm
Weight 1.05 kg
Rated Wind Velocity 216 km/h
Operating Temperature -40 to +70°C

Download Specification Sheet

BlackHawk Yagi Specification Sheet

No Comments Yet.

Leave a comment